07 Jan 2019
Mechanism design and analysis of a proposed wheelchair-exoskeleton hybrid robot for assisting human movement
Mech. Sci., 10, 11–24,
2019 10 Jan 2019
Solution-region-based synthesis approach for selecting optimal four-bar linkages with the Ball–Burmester point
Mech. Sci., 10, 25–33,
2019 10 Jan 2019
Use of mixed coordinates in modeling wind turbines including tubular tower
Mech. Sci., 10, 35–46,
2019 11 Jan 2019
Compact design of a novel precise cable drive mechanism with high precision and large torque-to-weight ratio
Mech. Sci., 10, 47–56,
2019 18 Jan 2019
Energy saving optimal design and control of electromagnetic brake on passenger car
Mech. Sci., 10, 57–70,
2019 15 Feb 2019
Design and dynamic analysis of metal rubber isolators between satellite and carrier rocket system
Mech. Sci., 10, 71–78,
2019 19 Feb 2019
Dynamic Reliability Analysis of Rotary Steering Drilling System
Mech. Sci., 10, 79–90,
2019 13 Mar 2019
Design of a robot-assisted exoskeleton for passive wrist and forearm rehabilitation
Mech. Sci., 10, 107–118,
2019 03 Apr 2019
Laparoscope arm automatic positioning for robot-assisted surgery based on reinforcement learning
Mech. Sci., 10, 119–131,
2019 04 Apr 2019
Quasi-static axial crushing of hexagonal origami crash boxes as energy absorption devices
Mech. Sci., 10, 133–143,
2019 26 Apr 2019
Buckling of elastically restrained nonlocal carbon nanotubes under concentrated and uniformly distributed axial loads
Mech. Sci., 10, 145–152,
2019 03 Jun 2019
Experimental study of immersion ratio and shaft inclination angle in the performance of a surface-piercing propeller
Mech. Sci., 10, 153–167,
2019 07 Jun 2019
Numerical analysis of the influence of the damping rings' thickness on interrupted dynamic tension results using SiC-reinforced ZC71 magnesium alloy specimens
Mech. Sci., 10, 169–186,
2019 07 Jun 2019
Nonlinear Dynamic Analysis of high speed multiple units Gear Transmission System with Wear Fault
Mech. Sci., 10, 187–197,
2019 11 Jun 2019
Influence of grinding wheel parameters on the meshing performance of toroidal surface enveloping conical worm drive
Mech. Sci., 10, 199–211,
2019 11 Jun 2019
Analytical Study of Babbitt/steel Composite Structural Bars in Oblique Contact-impact with a Solid Flat Surface
Mech. Sci., 10, 213–228,
2019 12 Jun 2019
Stability analysis of bicycles by means of analytical models with increasing complexity
Mech. Sci., 10, 229–241,
2019 14 Jun 2019
Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by DE based adaptive neuro-fuzzy inference system
Mech. Sci., 10, 243–254,
2019 18 Jun 2019
Mechanism design and parameter optimization of a new asymmetric translational parallel manipulator
Mech. Sci., 10, 255–272,
2019 19 Jun 2019
Effect of Quenching Media and Tempering Temperature on Fatigue Property and Fatigue Life Estimation Based on RBF Neural Network of 0.44 % Carbon Steel
Mech. Sci., 10, 273–286,
2019 21 Jun 2019
Research on Influence of Joint Clearance on Precision of 3-TPT Parallel Robot
Mech. Sci., 10, 287–298,
2019 25 Jun 2019
Displacement amplification ratio modeling of bridge-type nano-positioners with input displacement loss
Mech. Sci., 10, 299–307,
2019 25 Jun 2019
Computer-aided synthesis of spherical and planar 4R linkages for four specified orientations
Mech. Sci., 10, 309–320,
2019 27 Jun 2019
Influence of eccentricity of double eccentricity sleeves on the movements of swing head in rotary forging press
Mech. Sci., 10, 321–330,
2019 01 Jul 2019
Designing optimal automatic cycles of round grinding based on the synthesis of digital twin technologies and dynamic programming method
Mech. Sci., 10, 331–341,
2019 04 Jul 2019
Input Rationality Analysis of Three Degree of freedom Parallel Mechanism with Limbs of Embedding Structures
Mech. Sci., 10, 343–353,
2019 11 Jul 2019
Development of a novel flapping wing micro aerial vehicle with elliptical wingtip trajectory
Mech. Sci., 10, 355–362,
2019 17 Jul 2019
Analysis on the lateral vibration of drill string by mass effect of drilling fluid
Mech. Sci., 10, 363–371,
2019 18 Jul 2019
Tool Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy (Ti-6Al-4V)
Mech. Sci., 10, 373–382,
2019 22 Jul 2019
Compound optimal control of harmonic drive considering hysteresis characteristic
Mech. Sci., 10, 383–391,
2019 31 Jul 2019
Design of experiment-based tolerance synthesis for a lock-or-release mechanism of the Chinese Space Station Microgravity Platform
Mech. Sci., 10, 393–412,
2019 02 Aug 2019
Effect of deep cryogenic treatment on copper electrode for non-traditional electric discharge machining (EDM)
Mech. Sci., 10, 413–427,
2019 07 Aug 2019
Removal mechanism of machinable ceramics and theoretical model of cutting force in turning operation
Mech. Sci., 10, 429–436,
2019 12 Aug 2019
A holographic matrix representation of the metamorphic parallel mechanisms
Mech. Sci., 10, 437–447,
2019 26 Aug 2019
Architectural singularities of parallel mechanisms with prismatic joints due to special designs of platform shapes
Mech. Sci., 10, 449–464,
2019 26 Aug 2019
Failure analysis of a re-design knuckle using topology optimization
Mech. Sci., 10, 465–473,
2019 24 Sep 2019
Numerical modeling and dynamic characteristics study of coupling vibration of multistage face gearsplanetary transmission
Mech. Sci., 10, 475–495,
2019 07 Oct 2019
Dimensionless design approach to translating flat faced follower mechanism with two-circular-arc cam
Mech. Sci., 10, 497–503,
2019 30 Oct 2019
Effects of friction models on simulation of pneumatic cylinder
Mech. Sci., 10, 517–528,
2019 06 Nov 2019
The nonlinear vibrations of a vertical hard gyroscopic rotor with nonlinear characteristics
Mech. Sci., 10, 529–544,
2019 15 Nov 2019
Synthesis Theory and Optimum Design of Four-bar Linkage with Given Angle Parameters
Mech. Sci., 10, 545–552,
2019 18 Nov 2019
Stress state of a polygonal plate having a central circular hole with two linear cracks in the small physical non-linear condition
Mech. Sci., 10, 553–560,
2019 04 Dec 2019
Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions
Mech. Sci., 10, 561–573,
2019 04 Dec 2019
Rapid attitude maneuver of the space tether net capture system using active disturbance rejection control
Mech. Sci., 10, 575–587,
2019 13 Dec 2019
Kinematic analysis and evaluation of a hybrid mechanism for computer assisted bone reduction surgery
Mech. Sci., 10, 589–604,
2019