22 Jan 2020
Research on the micro and dynamic characteristics of combination surface based on fractal theory
Mech. Sci., 11, 1–27, 2020
07 Feb 2020
On the analysis and design of a fully compliant large stroke slider-crank (rocker) mechanism
Mech. Sci., 11, 29–38, 2020
12 Feb 2020
Boundary-layer separation in circular diffuser flows in the presence of an external non-uniform magnetic field
Mech. Sci., 11, 39–48, 2020
16 Mar 2020
Review article: Performance measures of parallel kinematics manipulators
Mech. Sci., 11, 49–73, 2020
18 Mar 2020
A bistable mechanism with linear negative stiffness and large in-plane lateral stiffness: design, modeling and case studies
Mech. Sci., 11, 75–89, 2020
01 Apr 2020
| Highlight paper
A general method for the determination of the instantaneous screw axes of one-degree-of-freedom spatial mechanisms
Mech. Sci., 11, 91–99, 2020
07 Apr 2020
Optimum design of the double roll rotary forging machine frame
Mech. Sci., 11, 101–114, 2020
20 Apr 2020
Dynamic modal analysis of double-sided meshing nutation drive with double circular arc spiral bevel gears
Mech. Sci., 11, 115–123, 2020
23 Apr 2020
Code-to-code verification for thermal models of melting and solidification in a metal alloy: comparisons between a Finite Volume Method and a Finite Element Method
Mech. Sci., 11, 125–135, 2020
12 May 2020
Axial transonic compressor performance enhancement with circumferential grooves
Mech. Sci., 11, 153–161, 2020
14 May 2020
Design and implementation of speed fluctuation reduction for a ball screw feed system at low-speed operation
Mech. Sci., 11, 163–172, 2020
27 May 2020
Study on power split characteristics of planetary multistage face gear transmission device and its effect to drive efficiency under variable speed working condition
Mech. Sci., 11, 173–182, 2020
03 Jun 2020
Study on dynamic characteristics of underwater pressure compensator considering nonlinearity
Mech. Sci., 11, 183–192, 2020
03 Jun 2020
Dynamic parameters identification of a haptic interface for a helicopter flight simulator
Mech. Sci., 11, 193–204, 2020
17 Jun 2020
Application of the multi-field coupling enhanced heat transfer principle to the engine compartment design of clean gas bus
Mech. Sci., 11, 205–220, 2020
17 Jun 2020
Experimental investigation for the effects of wire EDM process parameters over the tapered cross-sectional workpieces of titanium alloys (Ti6Al-4V)
Mech. Sci., 11, 221–232, 2020
06 Jul 2020
Spatial cellular robot in orbital truss collision-free path planning
Mech. Sci., 11, 233–250, 2020
08 Jul 2020
Synthesis of the base curves for n-lobed noncircular bevel gears
Mech. Sci., 11, 251–256, 2020
09 Jul 2020
A teeth-discretized electromechanical model of a traveling-wave ultrasonic motor
Mech. Sci., 11, 257–266, 2020
17 Jul 2020
Research on the HMCVT gear shifting smoothness of the four-speed self-propelled cotton picker
Mech. Sci., 11, 267–283, 2020
22 Jul 2020
Influence of flex-sub on mechanical properties of rotary steerable drilling system
Mech. Sci., 11, 285–297, 2020
31 Jul 2020
Design and Robustness Analysis of Intelligent Controllers for Commercial Greenhouse
Mech. Sci., 11, 299–316, 2020
11 Sep 2020
Comparative study of dynamically equivalent modeling methods for honeycomb sandwich structure: numerical simulations and experiments
Mech. Sci., 11, 317–328, 2020
07 Oct 2020
Numerical and experimental investigation of the effect of process parameters on sheet deformation during the electromagnetic forming of AA6061-T6 alloy
Mech. Sci., 11, 329–347, 2020
12 Oct 2020
Investigation of drilling 2D Cf∕C–SiC composites with brazed diamond core drills
Mech. Sci., 11, 349–356, 2020
20 Oct 2020
A new hand rehabilitation system based on the cable-driven mechanism and dielectric elastomer actuator
Mech. Sci., 11, 357–369, 2020
27 Oct 2020
Interfacial microstructures and properties of hyper-eutectic Al–21Si / hypo-eutectic Al–7.5Si bimetallic material fabricated by liquid–liquid casting route
Mech. Sci., 11, 371–379, 2020
27 Oct 2020
Singularity and branch identification of a 2 degree-of-freedom (DOF) seven-bar spherical parallel manipulator
Mech. Sci., 11, 381–393, 2020
28 Oct 2020
Thickness-utilizing deployable hard stops for origami-based design applications
Mech. Sci., 11, 395–410, 2020
06 Nov 2020
Design and evaluation of a hybrid passive–active knee prosthesis on energy consumption
Mech. Sci., 11, 425–436, 2020
23 Nov 2020
Horizontal axis wind turbine modelling and data analysis by multilinear regression
Mech. Sci., 11, 447–464, 2020
27 Nov 2020
Novel semiactive suspension using a magnetorheological elastomer (MRE)-based absorber and adaptive neural network controller for systems with input constraints
Mech. Sci., 11, 465–479, 2020