Articles | Volume 8, issue 2
https://doi.org/10.5194/ms-8-235-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
https://doi.org/10.5194/ms-8-235-2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Research article
| 
28 Jul 2017
Research article |
| 28 Jul 2017
Inverse dynamics and trajectory tracking control of a new six degrees of freedom spatial 3-RPRS parallel manipulator
Santhakumar Mohan
CORRESPONDING AUTHOR
Discipline of Mechanical Engineering, Indian Institute of Technology,
Indore, 453552, India
Burkhard Corves
Department of Mechanism Theory and Dynamics of Machines, RWTH Aachen
University, Aachen, 52072, Germany
Related authors
No articles found.
I. Ivanov and B. Corves
Mech. Sci., 5, 59–66, https://doi.org/10.5194/ms-5-59-2014, https://doi.org/10.5194/ms-5-59-2014, 2014
Related subject area
Subject: Mechanisms and Robotics | Techniques and Approaches: Numerical Modeling and Analysis
Study on the contact performance of the variable hyperbolic circular arc tooth trace cylindrical gear with installation errors
Multi-robot consensus formation based on virtual spring obstacle avoidance
A miniaturized statically balanced compliant mechanism for on-chip ultralow wide-bandwidth vibrational energy harvesting
Vibration coupling characteristics and grinding force control of an elastic component grinding system
Influence of a walking mechanism on the hydrodynamic performance of a high-speed wheeled amphibious vehicle
An investigation into the micro-geometric tapered-shape surface design of the piston bore of a piston–cylinder interface in an axial piston motor
Synthesis of clearance for a kinematic pair to prevent an overconstrained linkage from becoming stuck
Tooth profile design of a novel helical gear mechanism with improved geometry for a parallel shaft transmission
Instability load analysis of a telescopic boom for an all-terrain crane
Kinematics and control of a cable-driven snake-like manipulator for underwater application
A 2 degrees of freedom united propulsive mechanism for amphibious function inspired by frog's hindlimb
Dynamic characteristics of the gear-rotor system in compressed air energy storage considering friction effects
Denim-fabric-polishing robot size optimization based on global spatial dexterity
A general method for the determination of the instantaneous screw axes of one-degree-of-freedom spatial mechanisms
Mechanism design and parameter optimization of a new asymmetric translational parallel manipulator
Influence of grinding wheel parameters on the meshing performance of toroidal surface enveloping conical worm drive
A new manual wheelchair propulsion system with self-locking capability on ramps
The nonlinear vibrations of orthogonal mechanism of vibrating table in view of friction
Location of unbalance mass and supporting bearing for different type of balance shaft module
Toward force detection of a cable-driven micromanipulator for a surgical robot based on disturbance observer
Design and analysis of a 3-DOF planar micromanipulation stage with large rotational displacement for micromanipulation system
Research on a Hierarchical and Simultaneous Gravity Unloading Method for Antenna Pointing Mechanism
Guaranteed detection of the singularities of 3R robotic manipulators
On the infinitely-stable rotational mechanism using the off-axis rotation of a bistable translational mechanism
Dimensional synthesis of mechanical linkages using artificial neural networks and Fourier descriptors
On the positioning error of a 2-DOF spherical parallel wrist with flexible links and joints – an FEM approach
New empirical stiffness equations for corner-filleted flexure hinges
CHRONO: a parallel multi-physics library for rigid-body, flexible-body, and fluid dynamics
Dengqiu Ma, Bing Jiang, Lingli Bao, Zhenhuan Ye, and Yongping Liu
Mech. Sci., 15, 353–366, https://doi.org/10.5194/ms-15-353-2024, https://doi.org/10.5194/ms-15-353-2024, 2024
Short summary
Short summary
The relationship between installation error and contact performance was studied. The tooth surface equation and contact ellipse were deduced, and the imprinting experiment was realized. The tooth contact analysis (TCA) model was developed to investigate the influence of the installation error on the contact area. The formulas of the gap and flexibility matrix were given to develop the loaded TCA (LTCA) model. The influence of the installation error on load distribution was investigated.
Yushuai Fan, Xun Li, Xin Liu, Shuo Cheng, and Xiaohua Wang
Mech. Sci., 15, 195–207, https://doi.org/10.5194/ms-15-195-2024, https://doi.org/10.5194/ms-15-195-2024, 2024
Short summary
Short summary
In this study, we systematically improved the multi-robot formation control algorithm. We employed a virtual spring approach to stabilize formations, enhanced the Velocity Obstacle algorithm to address collisions in dynamic mobility, and introduced a leader for consistency. Simulations with up to 20 robots confirmed our method's suitability for large-scale formation obstacle avoidance. Position error and path length remained stable as robot numbers increased.
Haitong Liang, Hailing Fu, and Guangbo Hao
Mech. Sci., 15, 159–168, https://doi.org/10.5194/ms-15-159-2024, https://doi.org/10.5194/ms-15-159-2024, 2024
Short summary
Short summary
A miniaturized statically balanced compliant mechanism is proposed as a structural solution to effectively lower the working frequencies of vibrational energy harvesters to ultralow levels across a wide bandwidth for practical applications. This mechanism exhibits zero stiffness and zero force within a specific displacement range and stiffness nonlinearity in the overall range. It overcomes the working frequency limit imposed by the size effect, showing great potential application value.
Yufei Liu, Lang Wu, En Lu, and Jinyong Ju
Mech. Sci., 15, 123–136, https://doi.org/10.5194/ms-15-123-2024, https://doi.org/10.5194/ms-15-123-2024, 2024
Short summary
Short summary
This paper investigates the vibration coupling effect and grinding force control of an elastic component grinding system, which is a multi-dimensional coupling system conveying a dynamic interaction between the elastic component and the grinding device during the grinding process. The research results have guiding significance for the vibration control and constant force control of robotic grinding systems for elastic components.
Haijun Xu, Liyang Xu, Yikun Feng, Xiaojun Xu, Yue Jiang, and Xue Gao
Mech. Sci., 14, 277–292, https://doi.org/10.5194/ms-14-277-2023, https://doi.org/10.5194/ms-14-277-2023, 2023
Short summary
Short summary
A high-speed wheeled amphibious vehicle was designed and researched based on computational fluid dynamic (CFD) technology. The results were compared with the corresponding test results for verification. CFD is applied to analyze the influence of the wheel flip angle on the resistance performance, and resistance reduction is explained by the change in wake flow-field of the amphibious vehicle. The wheel well was optimized based on our requirement for the vehicle performance on land and water.
Rui Liu, Yishan Zeng, Min Hu, Huabing Zhu, Changhai Liu, and Lei Wang
Mech. Sci., 14, 259–275, https://doi.org/10.5194/ms-14-259-2023, https://doi.org/10.5194/ms-14-259-2023, 2023
Short summary
Short summary
In order to reduce the energy loss and improve the wear resistance of a piston–cylinder pair in an axial piston motor，an optimized tapered piston bore is designed and applied. A fluid–structure interaction numerical model and a new test rig of the friction force of the piston–cylinder pair are developed. Numerical analysis and experimental results show that the optimized tapered-shape piston bore in an axial piston motor can achieve a significant reduction in leakage flow and friction force.
Jian Qi, Yuan Gao, and Fufu Yang
Mech. Sci., 14, 171–178, https://doi.org/10.5194/ms-14-171-2023, https://doi.org/10.5194/ms-14-171-2023, 2023
Short summary
Short summary
Overconstrained linkages always need fewer links to realize complex motion in a 3D space and are supposed to be great for constructing large deployable structures. However, the strict geometric conditions are hard to use in a complicated 3D environment. In this study, joint clearance is actively introduced to improve the adaptivity of the linkages (with an example given). This work is significant for improving the application of overconstrained linkages in a complicated environment.
Enyi He and Shihao Yin
Mech. Sci., 13, 1011–1018, https://doi.org/10.5194/ms-13-1011-2022, https://doi.org/10.5194/ms-13-1011-2022, 2022
Short summary
Short summary
A novel helical gear mechanism with improved geometry is proposed to reduce transmission errors. For the novel spiral gear mechanism with improved geometry, the maximal contact stresses change more smoothly and have a stronger bearing capacity. The results show that, under the same conditions, the gear in this paper improves the transmission accuracy, and the bearing capacity is also stronger.
Jinshuai Xu, Yingpeng Zhuo, Zhaohui Qi, Gang Wang, Tianjiao Zhao, and Tianyu Wang
Mech. Sci., 13, 991–1009, https://doi.org/10.5194/ms-13-991-2022, https://doi.org/10.5194/ms-13-991-2022, 2022
Short summary
Short summary
A super element of the telescopic boom for an all-terrain crane is proposed, and its geometric nonlinear calculation is realized by the co-rotational (CR) formulation. Considering the cable force, the nonlinear equilibrium equations of the system are established, which are transformed into differential equations, and the load displacement curves of the nodes are obtained. Through the slope ratio of the load displacement curve, the judgment criterion of the instability load is established.
Fufeng Xue and Zhimin Fan
Mech. Sci., 13, 495–504, https://doi.org/10.5194/ms-13-495-2022, https://doi.org/10.5194/ms-13-495-2022, 2022
Short summary
Short summary
To date, most underwater manipulators have been rigid-link structures with a small number of degrees of freedom and have been unable to perform well in confined spaces. Due to their high dexterity and good adaptability to different environments, snake-like manipulators have strong potential for use in complex underwater applications. In this study, a tip-following algorithm is presented to weave through confined and hazardous spaces along a defined path with high efficiency.
Yucheng Tang, Xiaolong Yang, Xiaojin Zhu, Shichao Zhou, Wenbin Zha, Yuxin Sun, and Yulin Wang
Mech. Sci., 13, 437–448, https://doi.org/10.5194/ms-13-437-2022, https://doi.org/10.5194/ms-13-437-2022, 2022
Short summary
Short summary
This paper presents a novel united propulsive mechanism inspired by the frog’s hindlimb. This hybrid mechanism is composed of a planar six-bar linkage, which is designed using homotopy continuation and a spatial four-bar mechanism. The two sub-chains connected on the foot form a closed loop, which decreases the degrees of freedom (DoF) of the foot to 2. The preliminary simulations validate the amphibious function of the designed mechanism.
Xinran Wang, Wen Li, Dongxu Hu, Xingjian Dai, and Haisheng Chen
Mech. Sci., 12, 677–688, https://doi.org/10.5194/ms-12-677-2021, https://doi.org/10.5194/ms-12-677-2021, 2021
Short summary
Short summary
This paper investigates the influence of friction effects on a gear-rotor system in compressed air energy storage (CAES), a new mathematical model of the system is established, and some new vibration characteristics of the gear-rotor system are shown in this paper. The results obtained in this paper will provide a reference for the study and design of a gear-rotor system in CAES.
Wenjie Wang, Qing Tao, Xiaohua Wang, Yuting Cao, and Congcong Chen
Mech. Sci., 12, 649–660, https://doi.org/10.5194/ms-12-649-2021, https://doi.org/10.5194/ms-12-649-2021, 2021
Juan Ignacio Valderrama-Rodríguez, José M. Rico, and J. Jesús Cervantes-Sánchez
Mech. Sci., 11, 91–99, https://doi.org/10.5194/ms-11-91-2020, https://doi.org/10.5194/ms-11-91-2020, 2020
Short summary
Short summary
The paper presents a general procedure to determine the instantaneous rotation center for planar mechanisms, or its kinematical equivalent in the case of spherical or spatial cases, from the velocity analysis of the mechanism. The procedure is based on the theoretical results of the Lie algebra, se(3), of the Euclidean group, together with the Killing and Klein forms. The paper shows that a previous contribution contains fundamental errors and it was done in order to unify the theory.
Yi Yang, Yaqi Tang, Haijun Chen, Yan Peng, and Huayan Pu
Mech. Sci., 10, 255–272, https://doi.org/10.5194/ms-10-255-2019, https://doi.org/10.5194/ms-10-255-2019, 2019
Short summary
Short summary
With the requirement of heavy load for pick-and-place operation, a new 3-DoF asymmetric translational parallel manipulator is invented in this paper. This manipulator is assembled by a kinematic limb with the parallel linear motion elements(PLMEs), and a single loop 2-UPR. Owning to the linear actuators directly connecting the moving and the fixed platforms, this parallel manipulator has high force transmission efficiency, and adapts to pick-and-place operation under heavy load.
Chongfei Huai and Yaping Zhao
Mech. Sci., 10, 199–211, https://doi.org/10.5194/ms-10-199-2019, https://doi.org/10.5194/ms-10-199-2019, 2019
Gaspar Rodríguez Jiménez, David Rodríguez Salgado, Francisco Javier Alonso, and José María del Castillo
Mech. Sci., 9, 359–371, https://doi.org/10.5194/ms-9-359-2018, https://doi.org/10.5194/ms-9-359-2018, 2018
Short summary
Short summary
The present work describes the design and build of a new completely mechanical propulsion system for manual wheelchairs for use in ascending or descending long ramps. The design is characterized by a self-locking mechanism that activates automatically to brake the chair when the user stops pushing. The main component of the propulsion system is a planetary gear train that can self-lock, this means that the user does not need to activate external brakes.
Zharilkassin Iskakov, Kuatbay Bissembayev, and Nutpulla Jamalov
Mech. Sci., 9, 307–325, https://doi.org/10.5194/ms-9-307-2018, https://doi.org/10.5194/ms-9-307-2018, 2018
Short summary
Short summary
• With a large load on the vibrating table, the oscillation of the motor shaft angular velocity and the effect of friction on it are more significant.
• Simulink model of the mechanism was developed for numerical calculations.
• Friction increases the difference between the maximum and minimum values of the angular velocity and the coefficient of non-uniformity of rotation.
• Sliding friction influences the frequency, the maximum and minimum values of the work-table kinematic parameters.
Chan-Jung Kim
Mech. Sci., 9, 259–266, https://doi.org/10.5194/ms-9-259-2018, https://doi.org/10.5194/ms-9-259-2018, 2018
Short summary
Short summary
The conceptual design of balance shaft was very important process as how to locate the unbalance masses and corresponding supporting bearings. In this paper, the optimal conceptual balance shaft model was derived by using proposed objective functions for an inline 3-cylinder engine and an inline 4-cylinder one, respectively. Two kinds of optimal model were derived from simulations and efficient design guidelines was finally explained with design flowchart.
Wenjie Wang, Lingtao Yu, and Jing Yang
Mech. Sci., 8, 323–335, https://doi.org/10.5194/ms-8-323-2017, https://doi.org/10.5194/ms-8-323-2017, 2017
Short summary
Short summary
Force sensing plays an important role in minimally invasive surgery. In this study, a new asymmetric cable-driven type of micromanipulator for a surgical robot was designed, and a joint angle estimator(JAE) was designed based on the dynamical model system. Closed-loop control of the joint angle was carried out by regarding the JAE output as the feedback signal. An external force estimator was designed using a disturbance observer. The experimental results shown the correctness and validity.
Bingxiao Ding, Yangmin Li, Xiao Xiao, Yirui Tang, and Bin Li
Mech. Sci., 8, 117–126, https://doi.org/10.5194/ms-8-117-2017, https://doi.org/10.5194/ms-8-117-2017, 2017
Short summary
Short summary
A flexure-based monolithic micro manipulation stage with large workspace is designed and analyzed. The piezoelectric actuators are adopted to drive the manipulation stage. The optimized lever amplifier is integrated into the mechanism in order to compensate the stroke of the piezoelectric actuators. The working range of the manipulation stage along each axis is ± 42.31 μm, ± 48.56 μm, 0–10.28 m rad, respectively.
Guoyong Yang, Hongguang Wang, Jizhong Xiao, Zuowei Wang, and Lie Ling
Mech. Sci., 8, 51–63, https://doi.org/10.5194/ms-8-51-2017, https://doi.org/10.5194/ms-8-51-2017, 2017
Short summary
Short summary
This paper presents a gravity unloading facility to simulate micro-gravity environment of space. The facility unloads the gravity of artificial antenna of satellite and its pointing mechanism to test the performance of the pointing mechanism on the ground. The facility consists of two layers to unload gravity hierarchically and simultaneously while the antenna pointing mechanism consists of two joints. The calculation, simulation and experiments all show the effectiveness of the method applied.
R. Benoit, N. Delanoue, S. Lagrange, and P. Wenger
Mech. Sci., 7, 31–38, https://doi.org/10.5194/ms-7-31-2016, https://doi.org/10.5194/ms-7-31-2016, 2016
Short summary
Short summary
We propose two Interval Analysis based methods to characterize novel robots. Interval analysis theory allows us to consider intervals instead of values, making it possible to use computer algorithms, without the drawback of rounding errors. The first proposed method can isolate chosen interest points and is applied to the characteristic cusp and node points of 3R orthogonal manipulators. The second method encloses the robot available postures, giving complementary information on the novel robot.
G. Hao and J. Mullins
Mech. Sci., 6, 75–80, https://doi.org/10.5194/ms-6-75-2015, https://doi.org/10.5194/ms-6-75-2015, 2015
N. Khan, I. Ullah, and M. Al-Grafi
Mech. Sci., 6, 29–34, https://doi.org/10.5194/ms-6-29-2015, https://doi.org/10.5194/ms-6-29-2015, 2015
Short summary
Short summary
The problem of dimensional synthesis of mechanisms to trace a given closed curve is solved by (a) representation of curve shape using normalized Fourier descriptors and (b) learning the relation between Fourier descriptors and mechanism dimensions by an artificial neural network (ANN). The ANN developed suggests dimensions of a four-bar mechanism with coupler curve of shape similar to the one desired. The dimensions are further refined by optimization.
G. Palmieri
Mech. Sci., 6, 9–14, https://doi.org/10.5194/ms-6-9-2015, https://doi.org/10.5194/ms-6-9-2015, 2015
Short summary
Short summary
This paper deals with an elasto-static analysis of a 2-DOF spherical parallel
wrist where the links and the joints are considered flexible. An FEM approach is used to analyze the problem in a series of configurations of the wrist. The results are elaborated in order to obtain continuous maps of the positioning and orientation errors over the workspace of the machine.
Q. Meng, Y. Li, and J. Xu
Mech. Sci., 4, 345–356, https://doi.org/10.5194/ms-4-345-2013, https://doi.org/10.5194/ms-4-345-2013, 2013
H. Mazhar, T. Heyn, A. Pazouki, D. Melanz, A. Seidl, A. Bartholomew, A. Tasora, and D. Negrut
Mech. Sci., 4, 49–64, https://doi.org/10.5194/ms-4-49-2013, https://doi.org/10.5194/ms-4-49-2013, 2013
Cited articles
Abdellatif, H. and Heimann, B.: Computational efficient inverse dynamics of 6-DOF fully parallel manipulators by using the Lagrangian formalism, Mech. Mach. Theory, 44, 192–207, https://doi.org/10.1016/j.mechmachtheory.2008.02.003, 2009.
Alizade, R. I. and Tagiyev, N. R.: A forward and reverse displacement analysis of a 6-DOF in-parallel manipulator, Mech. Mach. Theory, 29, 115–124, https://doi.org/10.1016/0094-114X(94)90024-8, 1994.
Bonev, I. A.: Analysis and design of 6-DOF 6-PRRS parallel manipulators, Master Thesis, Kwangju Institute of Science and Technology, Kwangju, 1998.
Briot, S., Arakelian, V., and Guégan, S.: PAMINSA: A new family of partially decoupled parallel manipulators, Mech. Mach. Theory, 44, 425–444, https://doi.org/10.1016/j.mechmachtheory.2008.03.003, 2009.
Byun, Y. K. and Cho, H. S.: Analysis of a novel 6-DOF, 3-PPSP parallel manipulator, Int. J. Robot. Res., 16, 859–872, 1997.
Carbonari, L., Battistelli, M., Callegari, M., and Palpacelli, M.-C.: Dynamic modelling of a 3-CPU parallel robot via screw theory, Mech. Sci., 4, 185–197, https://doi.org/10.5194/ms-4-185-2013, 2013.
Dasgupta, B. and Mruthyunjaya, T.: The Stewart platform manipulator: a review, Mech. Mach. Theory, 35, 15–40, https://doi.org/10.1016/S0094-114X(99)00006-3, 2000.
Davliakos, I. and Papadopoulos, E.: Model-based control of a 6-dof electrohydraulic Stewart–Gough platform, Mech. Mach. Theory, 43, 1385–1400, https://doi.org/10.1016/j.mechmachtheory.2007.12.002, 2008.
Honegger, M., Brega, R., and Schweizer, G.: Application of a nonlinear adaptive controller to a 6 DOF parallel manipulator, in: Proceeding of the 2000 IEEE International Conference on Robotics and Automation, San Francisco, 2000.
Isaksson, M., Brogårdh, T., Watson, M., Nahavandi, S., and Crothers, P.: The Octahedral Hexarot – A novel 6-DOF parallel manipulator, Mech. Mach. Theory, 55, 91–102, https://doi.org/10.1016/j.mechmachtheory.2012.05.003, 2012.
Kelly, R., Santibanez, V., and Loria, A.: Control of Robot Manipulators in Joint Space, Springer, London, UK, 2005.
Kim, D. H., Kang, J. Y., and Lee, K.-II.: Robust tracking control design for a 6 DOF parallel manipulator, J. Robotic Syst., 17, 527–547, https://doi.org/10.1002/1097-4563(200010)17:10<527::AID-ROB2>3.0.CO;2-A, 2000.
Kim, H. S., Cho, Y. M., and Lee, K.-II.: Robust nonlinear task space control for a 6 DOF parallel manipulator, Automatica, 41, 1591–1600, https://doi.org/10.1016/j.automatica.2005.04.014, 2005.
Liu, X. J., Wang, J., Gao, F., and Wang, L. P.: Mechanism design of a simplified 6-DOF 6-RUS parallel manipulator, Robotica, 20, 81–91, https://doi.org/10.1017/S0263574701003654, 2002.
Merlet, J.-P.: Parallel Robots, Kluwer Academic Publishers, Boston, 2000.
Nag, A., Mohan, S., and Bandyopadhyay, S.: Forward kinematic analysis of the 3-RPRS parallel manipulator, in: New Trends in Mechanism and Machine Science: Theory and Industrial Applications, edited by: Wenger, P. and Flores, P., Springer International Publishing, 103–111, https://doi.org/10.1007/978-3-319-44156-6, 2017.
Nguyen, A. V., Bouzgarrou, B. C., Charlet, K., and Béakou, A.: Static and dynamic characterization of the 6-Dofs parallel robot 3CRS, Mech. Mach. Theory, 93, 65–82, https://doi.org/10.1016/j.mechmachtheory.2015.07.002, 2015.
Nguyen, C. C., Antrazi, S. S., Zhou, Z. L., and Campbell, C. E.: Adaptive control of a Stewart platform-based manipulator, J. Robotic Syst., 10, 657–687, https://doi.org/10.1002/rob.4620100507, 1992.
Pierrot, F.: A new design of a 6-DOF parallel robot, Journal of Robotics and Mechatronics, 2, 308–315, https://doi.org/10.20965/jrm.1990.p0308, 1990.
Ryu, S. J., Kim, J., Hwang, J., Park, C., Kim, J., and Park, F. C.: ECLIPSE: An Overactuated Parallel Mechanism for Rapid Machining, in: Proceedings of the 12th CISM-IFTOMM Symposium on the Theory and Practice of Robots and Manipulators, Paris, 1998.
Slotine, J. J. E. and Li, W.: Applied Nonlinear Control, Prentice-Hall, London, 1991.
Tahmasebi, F. and Tsai, L-W.: Six-degree-of-freedom Parallel “Minimanipulator” With Three Inextensible Limbs, U.S. Patent No. 5,279,176, 1994.
Ting, Y., Chen, Y. S., and Jar, Y. S.: Modeling and control for a Gough–Stewart platform CNC machine, J. Robotic Syst., 21, 609–623, https://doi.org/10.1002/rob.20039, 2004.
Uchiyama, M.: A 6 d.o.f. parallel robot HEXA, Adv. Robotics, 8, 601–601, https://doi.org/10.1163/156855394X00293, 1993.
Venkatesan, V., Singh, Y., and Mohan, S.: Inverse Kinematic Solution of a 6-DOF (3-RPRS) Parallel Spatial Manipulator, in: Proceedings of the 3rd Joint International Conference on Multibody System Dynamics – IMSD 2014, Busan, 2014.
Wu, D. and Gu, H.: Adaptive Sliding Control of Six-DOF Flight Simulator Motion Platform, Chinese J. Aeronaut., 20, 425–433, https://doi.org/10.1016/S1000-9361(07)60064-8, 2005.
Yang, C., Huang, Q., Jiang, H., Peter, O.O., and Han, J.: PD control with gravity compensation for hydraulic 6-DOF parallel manipulator, Mech. Mach. Theory, 45, 666–677, https://doi.org/10.1016/j.mechmachtheory.2009.12.001, 2010.
Zhang, D.: Parallel Robotic Machine Tools, Springer, London, https://doi.org/10.1007/978-1-4419-1117-9, 2010.
Short summary
This paper presents the complete dynamic model of a new six degrees of freedom (DOF) spatial 3-RPRS parallel manipulator. Further, a robust task-space trajectory tracking control is also designed for the manipulator along with a nonlinear disturbance observer. To demonstrate the efficacy and show the complete performance of the proposed controller, virtual prototype experiments are executed using one of multibody dynamics software namely MSC Adams.
This paper presents the complete dynamic model of a new six degrees of freedom (DOF) spatial...
