This paper takes the special machine tool for VH-CATT cylindrical gears as the research object. On the premise of machine tool modularization, the module configuration sequence of the machine tool is determined based on the depth-first search algorithm. The module is retrieved based on rough set theory and the fuzzy similarity priority ratio algorithm, and the module is instanced and traversed according to the configuration sequence to obtain the machine tool module configuration scheme.

In the early stage of the creative design of mechanisms, design work was accomplished mainly based on researchers' experience and inspiration, resulting in a low design efficiency. Moreover, the derived mechanism configurations were very limited. An effective mechanism design method is based on the atlas of topological structures of kinematic chains. Our research on the structural synthesis of kinematic chain inversions plays an important role in the improvement of mechanism design efficiency.

Springback is an inevitable problem in the local bending process of hull plates, which leads to low processing efficiency and affects the assembly accuracy. Therefore, the prediction of the springback effect, as a result of the local bending of hull plates, bears great significance. In total, four springback prediction models, based on genetic and back propagation neural network (GA-BPNN) algorithms and the improved particle swarm optimization (PSO)-BPNN algorithms, are established.

In this paper, a high-rigidity screw-type tip-inserting mechanism with a good centering effect is designed. The structural characteristics and working principle of the inserting mechanism are introduced, the stiffness model of the new-type pipetting device is established and its stiffness and axial deformation are calculated. Finally, a multi-station high-throughput automatic pipette produced by a company was used as an example to optimize and improve it and conduct a prototype test.

Non-circular grinding is used in the grinding of crankshafts. In this study, an equation for detecting the angle error in non-circular grinding is established. Previous studies did not exclusively detect the errors caused by bending deformation and torsional deformation. However, the established equation detects these errors separately. The angle error was found to be up to 0.44 arcsec, which is 5 % of the angle error obtained from previous studies.

The paper proposed a normal contact stiffness model considering 3D topography and elastic–plastic contact of rough surfaces. The proposed model is validated using experimental tests conducted on two types of specimens and is compared with published theoretical models. The proposed model can provide a tool for efficient calculation of the contact force, deformation, and contact stiffness in engineering surfaces.

In this paper, the typical mechanical joint surface is taken as the research object. Through the combination of theoretical analysis and experimental analysis, the dynamic characteristics of typical joint surface parameters with different surface textures and the influence of texture parameters on the dynamic characteristics of the joint surface are studied.

Temperature fields evolving during metal cutting processes have been of major interest. Temperatures in the tool influence the wear behaviour and hence costs, temperatures in the work-piece are directly responsible for later product quality. Due to the high significance of temperatures, many modelling attempts for temperature fields have been conducted, however failed to deliver satisfying results. The present paper describes an analytical model using complex functions based on potential theory.