11 citations as recorded by crossref.

1. Type Synthesis of Three-Degree-of-Freedom Translational Compliant Parallel Mechanisms C. Yue et al. https://doi.org/10.1115/1.4028758
2. Applying screw theory for summing sets of constraints in geometric tolerancing S. Arroyave-Tobón et al. https://doi.org/10.1016/j.mechmachtheory.2017.02.004
3. Position-Space-Based Compliant Mechanism Reconfiguration Approach and Its Application in the Reduction of Parasitic Motion H. Li et al. https://doi.org/10.1115/1.4033988
4. SYNTHESIS OF PARALLEL TRANSLATIONAL MICROMANIPULATION MECHANISMS WITH ELASTIC KINEMATIC PAIRS M. Harutyunyan et al. https://doi.org/10.53297/18293387-2024.1-47
5. Design and Analysis of Flexible Hinge Used for Unfolding Spacecraft Solar Panels J. Zhang et al. https://doi.org/10.5028/jatm.v11.1060
6. Adapting Polytopes Dimension for Managing Degrees of Freedom in Tolerancing Analysis S. Arroyave-Tobón et al. https://doi.org/10.1016/j.procir.2016.01.020
7. Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms G. Hao & H. Li https://doi.org/10.1177/0954406214535925
8. A constraint and position identification (CPI) approach for the synthesis of decoupled spatial translational compliant parallel manipulators H. Li & G. Hao https://doi.org/10.1016/j.mechmachtheory.2015.02.004
9. Design and analysis of flexure revolute joint based on four-bar mechanism J. Zhang et al. https://doi.org/10.1016/j.actaastro.2018.06.046
10. Rapid conceptual design and analysis of spatial flexure mechanisms O. Turkkan et al. https://doi.org/10.1016/j.mechmachtheory.2017.11.025
11. Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load X. Wu et al. https://doi.org/10.3390/s19040828