16 citations as recorded by crossref.

1. Influence of Wolff's law on the biomechanical and corrosion behavior of screws in femoral neck fixation S. Kuyubaşı et al. https://doi.org/10.1177/09544089251390137
2. Stability of L-shaped and inverted triangle fixation assemblies in treating Pauwels type II femoral neck fracture: a comparative mechanical study V. Giordano et al. https://doi.org/10.1007/s00590-018-2207-x
3. Biomechanical evaluation of internal fixation implants for femoral neck fractures: A comparative finite element analysis W. Zeng et al. https://doi.org/10.1016/j.cmpb.2020.105714
4. Effect of Knee Joint Meniscus Tears on Joint Cartilage Contact and Pressure with Finite Element Analysis C. Kurt & A. Gök https://doi.org/10.3390/biomedicines14040869
5. Using as Screw of PEEK in Femur Neck Fractures as an Alternative Biomaterial C. Kurt et al. https://doi.org/10.1007/s12666-025-03711-x
6. Comparison of effects of different screw materials in the triangle fixation of femoral neck fractures K. Gok et al. https://doi.org/10.1007/s10856-017-5890-y
7. NUMERIC ANALYSIS OF BIOMECHANICAL PERFORMANCE IN THE FEMORAL NECK FRACTURE OF A BIOMATERIAL S. KUYUBAŞI et al. https://doi.org/10.1142/S0219519423500495
8. Investigating the corrosion relationship and biomechanical effectiveness of Ti6Al4V screws Coated hBN and HA in triangular configuration for femoral neck fracture fixation using 3D modeling and numerical analysis K. Gok & A. Gok https://doi.org/10.1177/09544089241311391
9. INVESTIGATION USING FINITE ELEMENT ANALYSIS OF EFFECT TO EARRING OF ANISOTROPY PARAMETERS IN DEEP DRAWING PROCESS K. Gök et al. https://doi.org/10.54684/ijmmt.2023.15.1.80
10. Response concerning ‘Letter to editor’ by Ni et al. (2017), Arch Orthop Trauma Surg. DOI 10.1007/s00402-017-2710-2 K. Gok et al. https://doi.org/10.1007/s00402-017-2768-x
11. Computer Aided Simulation with Finite Element Analysis of the Effect of Face Mask Use Against COVID-19 and Other Infections C. İNAL et al. https://doi.org/10.54287/gujsa.1083882
12. SONLU ELEMANLAR YÖNTEMİ İLE YAPISAL ANALİZ UYGULAMALARINA İLİŞKİN BİR İNCELEME: MESLEK YÜKSEKOKULU ÖRNEĞİ A. Özdemir https://doi.org/10.55071/ticaretfbd.1754143
13. Obtaining patient-specific point model of the human ilium bone in the case of incomplete volumetric data using the method of parametric regions M. Trajanovic et al. https://doi.org/10.1007/s13246-018-0689-9
14. EVALUATION OF SCREWING CONFIGURATIONS IN CONVENTIONAL PLATING OF FEMORAL SHAFT FRACTURES USING FINITE ELEMENT ANALYSIS B. Öztepe et al. https://doi.org/10.1142/S0218957721300027
15. DESIGN AND NUMERICAL ANALYSIS OF FACE MASK POLYMER SHIELD AGAINST INFECTIOUS DISEASES A. GOK https://doi.org/10.1142/S0219519422500397
16. Use of the finite element analysis to determine stresses in the knee joints of osteoarthritis patients with different Q angles E. Afsar et al. https://doi.org/10.1007/s40430-016-0636-1