48 citations as recorded by crossref.

1. Analysis of a mechanism with redundant drive for antenna pointing X. Li et al.
2. High-Precision Low-Cost Gimballing Platform for Long-Range Railway Obstacle Detection E. Assaf et al.
3. Characterization in Dynamic Load Environment of COTS Synthetic Sapphire Bearings for Application in Magnetic Suspension in Space G. Delle Monache et al.
4. Additive manufacturing of a compliant mechanism using Zr-based bulk metallic glass J. Wegner et al.
5. Building Block Synthesis of Self-Supported Three-Dimensional Compliant Elements for Metallic Additive Manufacturing A. Danun et al.
6. An Overview of Procedures and Tools for Designing Nonstandard Beam-Based Compliant Mechanisms P. Bilancia & G. Berselli
7. (Non-)linear stiffness customisation of metallic additive manufactured springs A. Danun et al.
8. Constraint-Based Analysis of Parallel Kinematic Articulated Wrist Mechanisms R. Damerla & S. Awtar
9. Study of the hinge thickness deviation for a 316L parallelogram flexure mechanism fabricated via selective laser melting H. Wei et al.
10. ISC-based design of a 2-DOF parallel wrist with circular rail for dexterous hemispherical pointing in large-aperture antennas G. Tan et al.
11. Structure and controller design of a piezo-driven orientation stage for space antenna pointing S. Shao et al.
12. Design, development, and clinical validation of a two degrees of freedom compliant ankle-foot prosthesis based on a 4-4r parallel mechanism H. Xiu et al.
13. Fabrication, Experiments, and Analysis of an LBM Additive-Manufactured Flexure Parallel Mechanism H. Wei et al.
14. Stiffness characteristics of a laser beam melted (LBM) additive-manufactured flexure mechanism H. Wei et al.
15. Effect of NiTi-wired smart composite on morphing wings of unmanned aerial vehicles D. Reducindo et al.
16. The design of spatial compliant mechanisms with distributed multi-stability based on post-buckled cylindrical compliant beams H. Liang et al.
17. Reducing Automotive Cooling System Complexity through an Adaptive Biomimetic Air Control Valve T. Thuilot et al.
18. Cylindrical cross-axis flexural pivots J. Dearden et al.
19. Redesigning a flexural joint for metal-based additive manufacturing E. Ercolini et al.
20. High-order kinematics of uniform flexures M. Verotti
21. A variable section beams based Bi-BCM formulation for the kinetostatic analysis of cross-axis flexural pivots P. Bilancia et al.
22. Compound joints: Behavior and benefits of flexure arrays E. Merriam et al.
23. Design and Development of a Two Degree-of-Freedom Rotational Flexure Mechanism for Precise Unbalance Measurements Z. Hongzhe et al.
24. Design of non-assembly mechanisms: A state-of-the-art review K. Lussenburg et al.
25. Optimization of a near-zero-center-shift compliant pivot for large motion range and high bearing stiffness R. Bai et al.
26. A brief review on nonlinear modeling methods and applications of compliant mechanisms G. Hao et al.
27. Implicit lunar dust mitigation technology: Compliant mechanisms D. Budzyń et al.
28. Application of the ellipse of elasticity theory to the functional analysis of planar compliant mechanisms O. Sorgonà et al.
29. Mechanical design, analysis and testing of a large-range compliant microgripper Y. Liu & Q. Xu
30. A 3-D Printed Ti-6Al-4V 3-DOF Compliant Parallel Mechanism for High Precision Manipulation M. Pham et al.
31. Prediction of Fatigue Life for a New 2-DOF Compliant Mechanism by Clustering-Based ANFIS Approach N. Tran et al.
32. Nano-Mechanical Behavior of Ti6Al4V Alloy Manufactured Using Laser Powder Bed Fusion D. Liović et al.
33. Analysis of a three-extensible-rod tracker based on 3-RPS parallel manipulator for space large deployable paraboloid structure with power and communication integration T. Zheng et al.
34. Development of a magnetic cardan suspension coupled with a single actuated axis for gravity assisted pointing of directional devices: A case study of Moon to Earth alignment for a laser ranging reflector G. Delle Monache & M. Tata
35. Aging effects at room temperature and process parameters on 3D-printed poly (lactic acid) (PLA) tensile properties M. Domerg et al.
36. Design of High-Performance Triple-Axis Cross Pivots S. Serafino et al.
37. On the modeling of a contact-aided cross-axis flexural pivot P. Bilancia et al.
38. Design and testing of high-accuracy curved cross-axis flexural pivots with cable-driven actuation S. Serafino et al.
39. DeltaFlex—An Additively Manufactured Delta Robot With Compliant Joints: Virtual Prototyping and Experimental Evaluation A. Parmiggiani et al.
40. Dynamic photoelastic study of flexure hinges produced by additive manufacturing technology M. Dundović et al.
41. Computational design synthesis of additive manufactured multi-flow nozzles M. Biedermann & M. Meboldt
42. Position analysis in planar parallel continuum mechanisms O. Altuzarra et al.
43. Experimental Investigation on the Mechanical Properties of Thin Beams Built by Electron Beam Melting Technology and Ti6Al4V Material M. Pham et al.
44. Automated rigid bodies synthesis for AM compliant mechanisms G. Lang et al.
45. Investigation of heat exchange processes in a hinge fitting based on a compliant mechanism with variable stiffness for small spacecraft A. Kurguzov et al.
46. Compliant mechanisms that achieve binary stiffness along multiple degrees of freedom S. Shimohara et al.
47. The Development of a 3D-Printed Compliant System for the Orientation of Payloads on Small Satellites: Material Characterization and Finite Element Analysis of 3D-Printed Polyetherketoneketone (PEKK) M. Domerg et al.
48. First-time-right printing of compliant mechanisms manufactured with standard Laser Powder Bed Fusion process parameters: An investigation of the impact of manufacturing defects on the stiffness of thin structures G. Lang et al.