53 citations as recorded by crossref.

1. Large deflection analysis of cantilever beam under end point and distributed loads A. Kimiaeifar et al. 10.1080/02533839.2013.814991
2. Enforcing a Force–Displacement Curve of a Nonlinear Structure Using Topology Optimization with Slope Constraints J. Lee et al. 10.3390/app10082676
3. A Parametric Level Set Method for Topology Optimization Based on Deep Neural Network H. Deng & A. To 10.1115/1.4050105
4. Efficient reanalysis techniques for robust topology optimization O. Amir et al. 10.1016/j.cma.2012.07.008
5. Casting-oriented structural topology optimization with dimensional shrinkage C. Wang et al. 10.1016/j.apm.2023.01.001
6. Structural topology optimization considering both manufacturability and manufacturing uncertainties C. Wang et al. 10.1007/s00158-022-03458-9
7. On the influence of local and global stress constraint and filtering radius on the design of hinge-free compliant mechanisms A. de Assis Pereira & E. Cardoso 10.1007/s00158-018-1915-5
8. A new method for optimizing the topology of hinge‐free and fully decoupled compliant mechanisms with multiple inputs and multiple outputs J. Rong et al. 10.1002/nme.6644
9. Robust topology optimization accounting for misplacement of material M. Jansen et al. 10.1007/s00158-012-0835-z
10. Synthesis method of new weakly-coupled 5-DOF compliant parallel mechanism Y. Zhou et al. 10.1007/s12206-022-0709-2
11. Pseudo rigid body model for a nonlinear folding compliant mechanism B. Hargrove et al. 10.1016/j.mechmachtheory.2022.105017
12. Robust topology optimization accounting for spatially varying manufacturing errors M. Schevenels et al. 10.1016/j.cma.2011.08.006
13. Interpolation scheme for fictitious domain techniques and topology optimization of finite strain elastic problems F. Wang et al. 10.1016/j.cma.2014.03.021
14. On material selection for topology optimized compliant mechanisms J. Achleitner & E. Wehrle 10.1016/j.mechmachtheory.2021.104474
15. Simultaneous topology and fiber path optimization of composite structures with MAC constraints A. Elvas et al. 10.1016/j.compstruct.2022.115645
16. Fail-safe stress-constrained manufacturing error tolerant topology optimization G. da Silva & H. Emmendoerfer 10.1016/j.cma.2024.116817
17. Extended level set method: A multiphase representation with perfect symmetric property, and its application to multi-material topology optimization M. Noda et al. 10.1016/j.cma.2022.114742
18. Robust topology optimization of compliant mechanisms with uncertainties in output stiffness E. Cardoso et al. 10.1002/nme.6061
19. Topology optimization of turbulent flows C. Dilgen et al. 10.1016/j.cma.2017.11.029
20. Topology optimization of geometrically nonlinear structures using reduced-order modeling L. Zhang et al. 10.1016/j.cma.2023.116371
21. A statistical decomposition of geometric imperfections applied to robust topology optimisation N. Florian et al. 10.1016/j.ress.2025.111442
22. Stress-based topology optimization of continuum structures under uncertainties G. da Silva & E. Cardoso 10.1016/j.cma.2016.09.049
23. Maximum length scale in density based topology optimization B. Lazarov & F. Wang 10.1016/j.cma.2017.02.018
24. A stabilisation approach for topology optimisation of hyperelastic structures with the SIMP method R. Ortigosa et al. 10.1016/j.cma.2020.112924
25. In-plane material filters for the discrete material optimization method R. Sørensen & E. Lund 10.1007/s00158-015-1257-5
26. Robust topology optimization considering load uncertainty based on a semi-analytical method Y. Zheng et al. 10.1007/s00170-017-1002-x
27. On the similarities between micro/nano lithography and topology optimization projection methods M. Jansen et al. 10.1007/s00158-013-0941-6
28. Design of robust and efficient photonic switches using topology optimization Y. Elesin et al. 10.1016/j.photonics.2011.10.003
29. High-performance slow light photonic crystal waveguides with topology optimized or circular-hole based material layouts F. Wang et al. 10.1016/j.photonics.2012.04.004
30. Stiffness-Oriented Structure Topology Optimization for Hinge-Free Compliant Mechanisms Design J. Guo & H. Tang 10.3390/app112210831
31. Topology optimization of compliant mechanisms with stress constraints and manufacturing error robustness G. da Silva et al. 10.1016/j.cma.2019.05.046
32. Topology Optimization of Compliant Mechanisms Considering Manufacturing Uncertainty, Fatigue, and Static Failure Constraints D. Zhao & H. Wang 10.3390/pr11102914
33. Robust topology optimization based on finite strain considering uncertain loading conditions T. Nishino & J. Kato 10.1002/nme.6584
34. Robust topology optimization for harmonic displacement minimization of structures subjected to uncertainty in the excitation frequency F. Valentini et al. 10.1016/j.cma.2021.113767
35. Topology optimization considering material and geometric uncertainties using stochastic collocation methods B. Lazarov et al. 10.1007/s00158-012-0791-7
36. On the effect of boundary condition uncertainty on robust topology optimization of aerospace structures A. Vishwanathan et al. 10.1016/j.finel.2021.103533
37. Tolerance range section of topologically optimized structure using combined array design of experiments approach A. Javed & B. Rout 10.1177/0954406212468652
38. Optimal design of robust piezoelectric microgrippers undergoing large displacements D. Ruiz & O. Sigmund 10.1007/s00158-017-1863-5
39. Topology optimization with geometric uncertainties by perturbation techniques B.  Lazarov et al. 10.1002/nme.3361
40. Compliant articulation structure using superelastic NiTiNOL J. Liu et al. 10.1088/0964-1726/22/9/094018
41. Design of compliant constant-output-force mechanisms using topology optimization Q. Chen et al. 10.1080/0305215X.2022.2139373
42. Length scale and manufacturability in density-based topology optimization B. Lazarov et al. 10.1007/s00419-015-1106-4
43. Holistic computational design within additive manufacturing through topology optimization combined with multiphysics multi-scale materials and process modelling M. Bayat et al. 10.1016/j.pmatsci.2023.101129
44. Design of manufacturable 3D extremal elastic microstructure E. Andreassen et al. 10.1016/j.mechmat.2013.09.018
45. Topology optimization under uncertainty via non-intrusive polynomial chaos expansion V. Keshavarzzadeh et al. 10.1016/j.cma.2017.01.019
46. Topology optimization of compliant mechanisms considering stress constraints, manufacturing uncertainty and geometric nonlinearity G. da Silva et al. 10.1016/j.cma.2020.112972
47. Topology optimization of imperfect lattice materials built with process-induced defects via Powder Bed Fusion A. Moussa et al. 10.1016/j.addma.2020.101608
48. Investigation on parametric sensitivity of topologically optimized structures A. Javed & B. Rout 10.1177/0954406212437513
49. Topology optimization design of stretchable metamaterials with Bézier skeleton explicit density (BSED) representation algorithm H. Deng et al. 10.1016/j.cma.2020.113093
50. Multi-material topology optimization for additive manufacturing considering maximum build volume and assembly process Y. Feng & T. Yamada 10.1016/j.enganabound.2024.04.007
51. Robust topology optimization of structures with imperfect geometry based on geometric nonlinear analysis M. Jansen et al. 10.1016/j.cma.2014.11.028
52. Integrated Development of a Topology-Optimized Compliant Mechanism for Precise Positioning Y. Hu et al. 10.3390/act11070179
53. On filter boundary conditions in topology optimization A. Clausen & E. Andreassen 10.1007/s00158-017-1709-1