Experimental investigation for the effects of wire EDM process parameters over the tapered cross-sectional workpieces of titanium alloys (Ti6Al-4V)

Wasif, Muhammad; Iqbal, Syed A.; Fatima, Anis; Yaqoob, Saima; Tufail, Muhammad

doi:https://doi.org/10.5194/ms-11-221-2020

Articles | Volume 11, issue 1

https://doi.org/10.5194/ms-11-221-2020

© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

https://doi.org/10.5194/ms-11-221-2020

© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

Articles | Volume 11, issue 1

Research article

|

17 Jun 2020

Research article |

| 17 Jun 2020

Experimental investigation for the effects of wire EDM process parameters over the tapered cross-sectional workpieces of titanium alloys (Ti6Al-4V)

Muhammad Wasif, Syed A. Iqbal, Anis Fatima, Saima Yaqoob, and Muhammad Tufail

Data sets

Effects of Wire EDM Process Parameters over the Titanium Alloys (Ti6Al-4V) Muhammad Wasif https://doi.org/10.24435/materialscloud:e7-rf

Short summary

This research investigates the outcome of wire EDM process over the taper cross-sectional workpieces of Titanium Alloy (Ti6Al-4V). The outcomes result in better kerf width, surface finish, wire wear and metal removal rates, which can be controlled by taper angle of the workpiece, current, and pulse-off time. The effect of these parameters over the four outcomes of the wire EDM process have been studied in this research. Mathematical models have been developed to predict the outcomes.