20 citations as recorded by crossref.

1. Influence of the material manufacturing process on micromilling Ti6Al4V alloy M. Coimbra Gonçalves et al.
2. Study of the effect of sharpness of cutting tools on the formation of defects in the surface finish in micro cutting titanium alloys D. Rechenko et al.
3. Study of burr width and height using ANOVA in laser hybrid micro milling of titanium alloy (Ti6Al4V) S. ul hasan et al.
4. Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6 S. Zaidi et al.
5. Experimental study of tool wear and its effects on cutting process of ultrasonic-assisted milling of Ti6Al4V Q. Liu et al.
6. Exploring novel PVD coated wiper inserts’ chip breaker designs and feed rates on tool wear and in-depth hole integrity of Ti-6Al-4V alloy when drilling in a dry environment M. Afzal et al.
7. Investigation of Top Burr Formation in Micromilling for Surface Quality Improvement M. Kumar & V. Bajpai
8. Sustainability assessment of machining Al 6061-T6 using Taguchi-grey relation integrated approach S. Zaidi et al.
9. Burr formation mechanism and machining parameter effect in slot micro-milling titanium alloy Ti6Al4V Z. Yabo et al.
10. Three-Dimensional Displacement Measurement of Micro-Milling Tool Based on Fiber Array Encoding B. Jia & M. Zhang
11. Ti-6Al-4V Alaşımının Mikro Cep Frezeleme İşleminde Isıl İşlem, Soğutma Koşulları ve Takım Giriş Stratejilerinin Çapak Genişliği, Takım Aşınması ve Yüzey Kalitesi Üzerine Etkileri E. Malyer
12. Theoretical Notions with Practical Applications Regarding the Statistical Calculation of Dental Bur Wear F. Ilie
13. Modeling and simulating Poisson burr formation in high-speed micro-milling of 6061-T6 aluminum alloy C. Li et al.
14. A decision support tool for intelligent manufacturing systems via an elevator kinematic optimisation based method P. Luangpaiboon et al.
15. Unified plastic limit analysis of the cap periphery formation in orbital drilling of titanium alloy L. Zhou et al.
16. Investigation of machining parameters and cooling strategies on the burr geometry in micro-milling of titanium alloy (Ti–6Al–4V) G. Rehman et al.
17. Machinability analysis of Inconel 718 through parametric optimization using novel laser hybrid micro milling technique A. Tehami et al.
18. Study on overlap rate and machinability of selected laser melting of maraging steel Z. Yang et al.
19. Numerical investigations on a modified design of turning insert to decrease machining burr M. Asad
20. Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys Q. Gao et al.