Coupled skidding–impact dynamics of angular contact ball bearings with localized outer ring defects under elastohydrodynamic lubrication
Abstract. Localized outer-race defects in angular contact ball bearings (ACBBs) can generate impact excitation, while rolling-element skidding alters the kinematic conditions at the contact interfaces. This study investigates their coupled effects on bearing response in the presence of elastohydrodynamic lubrication (EHL). A dynamic model with four degrees of freedom is developed by incorporating spinning motion, lubricant-film effects, rolling-element skidding, and impact-related velocity variations. The modeling procedure begins with the formulation of a time-dependent displacement function to represent the excitation associated with a localized defect. The effective bearing stiffness is then evaluated through the integration of the Hertzian contact contribution and the stiffness provided by the lubricant film. To characterize non-ideal rolling behavior, the skidding velocities relative to the inner and outer races are determined by accounting for rolling-element motion and the transient velocity changes associated with interactions at the defect boundaries. The corresponding friction forces are subsequently incorporated into the dynamic equations. Numerical results indicate that spinning motion reduces the vibration amplitude, whereas EHL provides a pronounced attenuation of bearing vibration. An increase in rotational speed leads to higher fault-related characteristic frequencies and vibration amplitudes. In contrast, skidding lowers the characteristic frequency while intensifying the vibration response. When defect-edge impacts are included, the resulting transient increase in rolling-element velocity produces a higher characteristic frequency than that predicted by the model considering skidding alone, accompanied by a further increase in vibration amplitude. Variations in defect size and applied load affect the vibration amplitude but do not change the fault characteristic frequency.