Preprints
https://doi.org/10.5194/ms-2026-199
https://doi.org/10.5194/ms-2026-199
19 Nov 2026
 | 19 Nov 2026
Status: this preprint is currently under review for the journal MS.

Geometric Optimization of Sprag Overrunning Clutches for Improved Torque Capacity Based on Nonlinear Transient Analysis

Fahimeh Mashayekhi, Stefano Zucca, and Christian Maria Firrone

Abstract. Sprag overrunning clutches provide one-way torque transmission in powertrains, but their performance during engagement is governed by nonlinear contact and frictional interactions. The strong coupling between geometric parameters, contact forces, and failure mechanisms makes it difficult to identify optimal designs through analytical approaches or conventional parametric studies. This study presents a failure-aware geometric-optimization framework that integrates nonlinear transient dynamic analysis to improve torque transmission performance while accounting for the competing design requirements. A displacement-based nonlinear dynamic model is employed to evaluate contact stress, slippage, and sprag rollover during transient loading. By combining this model with a genetic algorithm, the framework searches for a desired combination of five geometric parameters. A stress-weighted objective function favors higher failure-onset torque and lower contact stress, while geometric feasibility constraints are imposed. For fixed inner and outer race radii, the best design increases the slippage-onset torque by 42.8 %, while reducing the corresponding maximum contact stress from 3.23 to 2.83 GPa, below the prescribed allowable limit. Under identical loading conditions, the optimized geometry also reduces contact stress and sprag rotation, but exhibits a lower frictional safety margin. Repeating the optimization with a reduced friction coefficient yields a different geometry with a higher frictional safety margin under nominal conditions, although at the expense of increased stress and rotation. These results demonstrate the potential of integrating transient dynamics with geometric optimization to identify improved clutch designs while revealing trade-offs between torque transmission and frictional robustness.

Publisher's note: Copernicus Publications remains neutral with regard to jurisdictional claims made in the text, published maps, institutional affiliations, or any other geographical representation in this paper. While Copernicus Publications makes every effort to include appropriate place names, the final responsibility lies with the authors. Views expressed in the text are those of the authors and do not necessarily reflect the views of the publisher.
Share
Fahimeh Mashayekhi, Stefano Zucca, and Christian Maria Firrone

Status: open (until 26 Dec 2026)

Comment types: AC – author | RC – referee | CC – community | EC – editor | CEC – chief editor | : Report abuse
Fahimeh Mashayekhi, Stefano Zucca, and Christian Maria Firrone
Fahimeh Mashayekhi, Stefano Zucca, and Christian Maria Firrone
Metrics will be available soon.
Latest update: 19 Nov 2026
Download
Short summary
Sprag overrunning clutches transmit torque in one direction, and their performance depends strongly on sprag geometry. This study combines transient dynamic simulations with geometric optimization to identify designs that balance competing requirements. The best design increases the applied torque at the onset of slippage by 42.8 %. The results also show that improving torque performance can reduce the frictional safety margin, highlighting the importance of friction variability.
Share