References

Mechanical Sciences

Mech. Sci.

2191-916X

Copernicus Publications

Göttingen, Germany

10.5194/ms-3-33-2012

Finite element thermal analysis of the fusion welding of a P92 steel pipe

Yaghi

A. H.

¹ Tanner

D. W. J.

¹ Hyde

T. H.

¹ Becker

A. A.

¹ Sun

Materials, Mechanics and Structures Research Division, Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK

09 05 2012

3 1 33 42

2012

This work is licensed under the Creative Commons Attribution 3.0 Unported License. To view a copy of this licence, visit https://creativecommons.org/licenses/by/3.0/

This article is available from https://ms.copernicus.org/articles/3/33/2012/ms-3-33-2012.html

The full text article is available as a PDF file from https://ms.copernicus.org/articles/3/33/2012/ms-3-33-2012.pdf

Fusion welding is common in steel pipeline construction in fossil-fuel power generation plants. Steel pipes in service carry steam at high temperature and pressure, undergoing creep during years of service; their integrity is critical for the safe operation of a plant. The high-grade martensitic P92 steel is suitable for plant pipes for its enhanced creep strength. P92 steel pipes are usually joined together with a similar weld metal. Martensitic pipes are sometimes joined to austenitic steel pipes using nickel based weld consumables. Welding involves severe thermal cycles, inducing residual stresses in the welded structure, which, without post weld heat treatment (PWHT), can be detrimental to the integrity of the pipes. Welding residual stresses can be numerically simulated by applying the finite element (FE) method in Abaqus. The simulation consists of a thermal analysis, determining the temperature history of the FE model, followed by a sequentially-coupled structural analysis, predicting residual stresses from the temperature history. <br><br> In this paper, the FE thermal analysis of the arc welding of a typical P92 pipe is presented. The two parts of the P92 steel pipe are joined together using a dissimilar material, made of Inconel weld consumables, producing a multi-pass butt weld from 36 circumferential weld beads. Following the generation of the FE model, the FE mesh is controlled using Model Change in Abaqus to activate the weld elements for each bead at a time corresponding to weld deposition. The thermal analysis is simulated by applying a distributed heat flux to the model, the accuracy of which is judged by considering the fusion zones in both the parent pipe as well as the deposited weld metal. For realistic fusion zones, the heat flux must be prescribed in the deposited weld pass and also the adjacent pipe elements. The FE thermal results are validated by comparing experimental temperatures measured by five thermocouples on the pipe outside surface with the FE temperature history at corresponding nodal points.

References 1

ABAQUS User Manual: version 6.9, Dassault Systèmes Simulia Corp., Providence, RI, USA, 2009.

Brickstad, B. and Josefson, B. L.: A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes, Int. J. Pres. Ves. Pip., 75, 11–25, 1998.

Brózda, J.: New Generation Creep-Resistant Steels, their Weldability and Properties of Welded Joints: T/P92 Steel, Welding International, 19, 5–13, 2005.

Deng, D. and Murakawa, H.: Prediction of welding residual stress in multi-pass butt-welded modified 9Cr-1Mo steel pipe considering phase transformation effects, Comp. Mater. Sci., 37, 209–219, 2006.

Holloway, G. B., Zhang, Z., and Marshall, A. W.: Weld metals for USC power plant: Properties of T/P92 CrMo weld metals for ultra super critical (USC) power plant, Metrode Products Ltd, UK, August 2008.

Richardot, D., Vaillant, J. C., Arbab, A., and Bendick, W.: The T92/P92 Book, Vallourec & Mannesmann tubes, 2000.

Saunders, N., Superalloys, R., Kissinger, R. D., Deye, D. J., Anton, D. L., Cetel, A. D., Nathal, M. V., Pollock, T. M., and Woodford, D. A. (Eds.): TMS, Warrendale, PA, 115 pp., 1996.

Special Metals: Inconel Alloy 625, Publication Number SMC-063, January 2006.

The Engineering ToolBox: Metals and Latent Heat of Fusion, available at: <a href="www.engineeringtoolbox.com/fusion-heat-metals-d_1266.html">www.engineeringtoolbox.com/fusion-heat-metals-d_1266.html</a>, cited on 31 January 2011.

Yaghi, A. H., Hyde, T. H., Becker, A. A., Williams, J. A., and Sun, W.: Residual stress simulation in welded sections of P91 pipes, J. Mater. Process. Tech., 167, 480–487, 2005.

Yaghi, A. H., Hyde, T. H., Becker, A. A., Sun, W., Hilson, G., Simandjuntak, S., Flewitt, P. E. J., Pavier, M. J., and Smith, D. J.: A comparison between measured and modelled residual stresses in a circumferentially butt-welded P91 steel pipe, J. Press. Vess.-T. ASME, 132, 011206-1–011206-10, 2010.